How do you know when it’s time for new windows?
Interstate’s trained account managers can help answer all your questions.
We carry a high quality line of energy saving, virtually maintenance free, easy to clean windows. Interstate’s SummitView Vinyl Window lines make choosing your new windows EASY!
We also have a contractor referral program to help you hire the most reputable licensed contractor in your area who has Interstate vinyl replacement windows installation experience.

How to Buy New Windows. . . Is the wood rotting or aluminum pitting or chalking on your present windows? Do you feel drafts? Are your heating bills too high?

Those are signs that it may be time for new replacement windows.
New replacement windows will not only enhance the look of your home, but save you money as well.
Interstate’s trained account managers can help you make all your decisions regarding new windows.

How to Hire The Best Installer for the Job. . . Installing replacement windows can be a difficult job. Interstate has a contractor referral program to help
you hire the most reputable licensed contractor  with Interstate window installation experience in your area. Our list of installers are licensed and insured and can provide references from other very satisfied customers.

Condensation Information

Where does condensation come from?
Today’s energy-efficient homes are manufactured more airtight than ever. But in addition to sealing in warmth and air conditioning, they also tend to hold in too much moisture-laden air.

If your home contains excessive moisture and it’s cold outside, the first place you’ll see it is on your windows. You may think this means there’s a problem with your windows, but it doesn’t. In fact, the vast majority of window condensation problems are not the result of faulty windows. The windows are just indicating that your home needs added ventilation to lower the amount of moisture in the air.

Can condensation damage your windows?
Occasional beads of moisture on the glass of your windows usually isn’t a problem.
For example, it’s likely your bathroom mirror and windows will steam up after a hot shower. Or your kitchen window may fog up when you’re boiling food on the stove. But in both these cases, the moisture clears in a matter of minutes.  However, if your windows are “sweating” at other times - or stay that way for any length of time - you probably do have a problem.
Although the glass itself may not be affected, dripping condensation and excess moisture can not only damage your windows but potentially your entire home.
• Wood frames and sash can warp and become difficult to operate.
• Paint can peel and other finishes become mottled or stained.
• Insulation can become damp, damaging ceilings and walls.
• Exterior siding and finishes can become blistered and warped.
• Interior surfaces can become breeding grounds for mold and mildew.

This is why it’s so important to take steps to control and eliminate excess moisture.

Where does all the moisture come from?
In a word, everywhere.
• In the kitchen, moisture is generated by cooking food, using the sink,running the dishwasher.
• In the bathroom, from showers, hot tubs and spas.
• Washers and indoor-vented dryers contribute as well.
• Basements and crawl spaces can channel dampness from the ground into your home.
• Even breathing and perspiration add moisture to indoor air.

Collectively, a family of four can easily generate up to 18 gallons of water a week in the form of humidity inside your home.

How can you get rid of excessive moisture?
To lower your home’s humidity levels, you need to increase ventilation and decrease the sources of moisture.
• Make sure you have good ventilation in high-humidity areas: bathrooms, the kitchen, laundry areas and in the basement.
• If you already have adequate exhaust fans and dehumidifiers in  these areas, try running them for longer periods of time.
• Take shorter showers and install water-restricting faucets - you’ll  lower the humidity and your energy bills as well.
• Cook a little differently. Keep pots and pans covered to hold  moisture in. Use your microwave instead of boiling on the stove. Slow-cooking crock pots are energy-efficient and moisture- efficient, too.
• Check and reroute drainage away from your home, to minimize the moisture in and around your basement and foundation.

How much humidity is the right amount?
You’ve probably heard that your home will feel warmer in winter if the humidity is higher. That’s true, and why many people use humidifiers to counteract dry, static-filled air during the heating season.

In older homes, excess moisture usually isn’t a problem because the structure “breathes” through unsealed cracks and crannies in the construction, creating a regular exchange of outdoor and indoor air. That’s why it is often a struggle to keep enough moisture inside older homes.

But with today’s modern construction techniques, homes are much tighter and energy-efficient. As a result, newer homes don’t usually need a way to add moisture - they’re more likely to have trouble getting rid of it.

So how much humidity is enough to keep us comfortable without dampening our surroundings? Refer to the following chart for temperature and humidity levels that are generally considered comfortable.

Not sure what the humidity is inside your home? Ask a HVAC (heating, ventilating and air conditioning) contractor to measure it for you.

What else can you do to lower excessive indoor moisture levels?
The basic principle of reducing window condensation is simple. When there’s too much condensation on your windows it means the humidity is too high in your home for the current condition outside.

Here are some additional actions that may help decreaseexcessive humidity levels:
• Open your windows occasionally to vent excess moisture.
• If the condensation is on the storm window, open it periodically to vent excess moisture.
• Open drapes and blinds to allow warm house air to circulate against the window.
• Turn off your furnace humidifier or other home humidifiers.
• Make sure dehumidifiers are working properly and well drained.
• Be sure that louvers in the attic or basement crawl space are open and are of adequate size.
• Run ventilating fans in the kitchen and bathrooms more often.
• Air out your house by opening a door or window for a few minutes after the bathroom, kitchen or laundry has steamed up.

If moisture problems still persist, talk to a HVAC professional or your gas or electric company. They may have additional suggestions for reducing humidity, including venting gas-burning heaters and appliances, adding ventilation fans or getting an outside air intake for your furnace.

Is there any window condensation that’s temporary?
There are two causes of temporary window condensation, and they normally disappear after a few weeks.

First, there is moisture that comes from new construction or remodeling. There’s moisture in new wood, plaster and other building materials. When the heating season starts, this moisture gradually flows into the air of the home. After a few weeks, or at the most, a season of heating, this moisture will disappear.

Second, this same type of moisture can accumulate in a milder form at the beginning of each heating season. During the summer, your house absorbs moisture. After the first few weeks of heating, your home will “dry out” and you’ll have less trouble with window condensation.

What if there’s condensation between the pieces of glass in an insulating window?
As building experts often point out, windows should not be blamed for condensation. They merely are an indicator of too much moisture in the air. In the unlikely event you see condensation between the panes of glass in an insulating window, contact the window contractor or dealer who sold you the windows. Moisture between the glass means that the seal on your window has failed. It’s a rare occurrence, but one that is usually covered for 10 to 20 years under the manufacturer’s limited warranty.

Some of the information above was derived from the following sources:
• Moisture and Home Energy Conservation, U.S. Department of Energy-DOE/CE/15095-4
• Washington Energy Extension Service Technote - Moisture Problems and Multiple Glazing - TN1003
• University of Illinois at Urbana-Champaign - Small Homes Council - Building Research Council. Council Notes Moisture Condensation - F6.2 
• Better Business Bureau

Company History

• 1938 – Interstate began in Wilkes-Barre, PA with exclusive distributorship of Perma-Stone, a unique imitation stone made with real masonry products

• 1960s  - relocated to Pittston, PA, halfway between Wilkes-Barre and Scranton, PA

• 1960s  - granted a distributorship of aluminum products from ALSAR Corp of Southfield, MI

• 1969 - was incorporated as  Interstate Aluminum Distributors, Inc. and received exclusive distributorship of Reynold’s Metal Company products

• 1984 – began vinyl window manufacturing and formed Interstate Window & Door Company

• 1998 – Interstate Aluminum Distributors, Inc. merged with Interstate Window & Door Company  to form Interstate Building Materials, Inc.

ENERGY STAR was created to help consumers easily identify products, homes, and buildings that save energy and money, and help protect the environment. As the government-backed, trusted symbol for energy efficiency, the ENERGY STAR label identifies highly efficient products and designates superior energy performance in homes and buildings. www.energystar.gov

Benefits of ENERGY STAR:

• ENERGY STAR qualified windows today are, on average, twice as efficient as the average window made ten years ago.
• ENERGY STAR qualified windows can help reduce your energy bills significantly. Over the lifetime of a typical window, the return on investment can be substantial and as an added benefit, saving energy prevents pollution.
• ENERGY STAR qualified windows also provide a host of benefits, including: increased comfort, noise reduction, and protection against sun damage to carpet, wood floors, furniture, fabrics and artwork in your home.
  
  For the cooler northern climate, ENERGY STAR qualified windows are designed to keep heat in, reducing the amount of extra heat needed to keep your home warm. Qualified windows in the northern region tend to have non-metal frames such as vinyl;
  at least 2 glazing layers (sometimes filled with insulating argon gas); and a low-e coating.