Custom Built Window and Door Systems, Inc. 80 Meadow St Warwick, RI 02886

Since 1961 Custom Built Window and Door Systems, Inc. has been in the business of manufacturing the highest quality custom windows and doors to our customers for replacement or new construction needs. From vinyl double-hungs and architectural shapes to entry doors, porch enclosures, storm windows, and now glass railing systems, we can do it all. Take a look around and see what we have to offer. When you're convinced our products are the right fit, ask your installer for Custom Built products.

Are you a manufacturer looking to offer woodgrain and/or architectural shapes to your customers, but would prefer to outsource these options? Look no further than Custom Built.

Let our expert craftsmen with years of experience laminate your vinyl extrusion, or bend the architectural shapes you need.

There are many reasons to switch to vinyl. The most compelling reasons are that vinyl replacement windows is more energy efficient, easier to maintain, and more durable than wood windows.

Energy Efficiency - Vinyl is more energy efficient than wood as it is more resistant to energy transfer, and is a great insulator. When teamed with our Low-E glass to further insulate the windows, you will have a superior product that protects your home year round, reduces energy costs, all while improving your home's appearance.

Easy Maintenance - Vinyl Windows require only soap and water to clean. They will never rot, chip, crack or peel. The windows will operate any time of year in nearly any environment, unlike wood which expands and contracts depending on the weather.

Peace of Mind - Not only do Custom Built's windows add an entirely new look to your home, they also come with a 20 year warranty, giving you peace of mind.

Double pane glass became the standard in the window industry during the 1970s as the government invested in research to find more effecient products during the energy crisis. They found a substantial energy savings utilizing dual over single panes of glass in windows.

Dual Pane glass is made up of 2 pieces of glass with an aluminum spacer sitting in the middle. A product known as desiccant is used to fill the spacer and prevent condensation from forming between the glass. The air in between acts as an insulator. In extremely cold regions, triple paned windows are used to even further insulate the windows.

Low-E, or low-emittance, coating is a nearly invisible metal film deposited on a window surface to reduce the U-factor by supressing heat flow between the cooler and warmer panes of glass. Argon gas is a popular option here as well. Argon gas is a non-toxic, colorless gas that is heavier than oxygen. That additional weight means it moves slower than oxygen, thereby further reducing the thermal radiation process.

Tempered, or safety glass, is a type of glass that has been strengthened during the production process. This additional strength makes the glass harder to break, though if it does break, the resulting pieces would be small squares, as opposed to large shards, thereby reducing the potential for a serious injury.

Obscure glass is typically used in bathroom windows or anywhere privacy would be desired as it's translucent nature still allows light to pass through. There are many different obscure designs, giving you flexibility in your design.

In order to understand why you are getting condensation on your glass, it is important to understand how condensation forms. Condensation is a very natural and common event, primarily occuring during spring and fall when a warm day follows a cool night, however it can occur any time of year. When warm, moist air comes into contact with cooler surfaces, the excess moisture in the air will condense because the now cooler air cannot hold as much moisture. The point at which the moisture condenses is known as the dewpoint.

Condensation is a very common occurence, however the elimination of such depends on its location whether it be interior, exterior, or between the panes of glass.

Interior condensation:
Caused by excess moisture inside the home, condensation will form on the glass as the warmer moist air condenses on a relatively cooler surface. Since vinyl and glass are by nature cooler surfaces, it will typically show there first. This is not indicative of a problem with the window, in fact it is a warning sign that you may have a humidity problem in your home. Moisture can form in between the walls and ceilings. It can cause rot and mold to form, and can cause paint to blister and peel. In order to eliminate that moisture, you must reduce the humidity in your home. There are many ways this can be accomplished depending on the home.

Exterior condensation:
Condensation on the outside of the panes is most common during spring and fall when a cool night follows a warm day. When the temperature increases, the condensation will evaporate. In fact, this is a sign of energy efficiency, not a malfunctioning window, because the outside pane is thoroughly insulated from the heat indoors.

Between the panes:
Condensation forming between the panes that cannot be wiped off is typically a sign of seal failure. Please contact your installer for service.

My previous windows didn't have any condensation, why are my new windows showing it?
While it may be natural to blame the new windows because condensation wasn't showing before, one must take into account the reason the old windows were replaced. Generally, they leaked, were broken, were drafty, etc. The new windows will trap the air more effectively and not allow it to escape. The product was designed to prevent air leakage, both warm air escaping your home in the winter and cool air in the summer.

My neighbors' homes do not have any condensation on their windows, but mine do. Is there something wrong with my windows?
Condensation is not indicative of a product mailfucntion. Unfortunately there is no way we could tell you why your house has condensation where someone else's does not, other than to explain why condensation would occur. There are too many variables for us to pinpoint a reason as to why it might occur. The age of the house, the type of windows installed, the type and amount of insulation used in construction, the number of people in the home and their living habits, the heating/cooling system in place, which way their house faces when the sun rises, among many other things all contribute to the amount of moisture in an individual home.

Your home is one of the most important investments you'll ever make. Let Custom Built use the latest
technologies in new and replacement window and door manufacturing to enhance the beauty and comfort of your space. Because each Custom Built product is custom made to the size you require, you know it will be a perfect fit.

Take a look at our Low-E glazing and argon gas options to further insulate your windows and provide you superior thermal efficiency. Don't forget the decorative glass options available for our entrance doors. They'll give your home the unique look you're looking for.